Here are the cleaning instructions for the Akucal x-ray scaling tool:
Preparation: Always put on disposable gloves before starting the cleaning process to prevent cross-contamination.
Wiping the Device: Use a standard disinfectant wipe to clean the device thoroughly. Make sure to wipe down the entire surface area of the device, including the handle and the scaling arm.
Avoiding Patient Contact: The Akucal x-ray scaling tool should not make direct contact with the patient. Always use a barrier, such as a disposable cover or bag, between the device and the patient to prevent contamination.
Do Not Autoclave: The device is not suitable for autoclaving. High temperatures can damage the device. Always use a standard disinfectant for cleaning.
Changing the Ballclaw Tip (BC-11): The Ballclaw tip should be replaced as needed, especially during trauma cases. To replace the Ballclaw tip, gently pull it away from the arm.
Cleaning the Ballclaw Tip: If you do not have a replacement available, the Ballclaw tip can be disassembled and cleaned thoroughly. Once disassembled, clean each part individually using standard disinfectant, ensuring all parts are thoroughly dry before reassembly.
Bagging During Trauma Patients: In the case of trauma patients, the unit can be placed inside a bag. This can help prevent contamination.
After Cleaning: Once you have finished cleaning, dispose of your gloves and wash your hands thoroughly.
Replacements: Replacement parts for the Akucal x-ray scaling tool, including the Ballclaw tip, can be purchased from www.j2medical.com.
Always make sure to follow the manufacturer's instructions and hospital guidelines to ensure the device is kept in good condition and safe for use.